|
Width Control
The TSM Automatic Width Control System gives you, the customer, three options for maintaining a specific bubble size during normal operation. These options are ideal for managing on-the-fly size changes, reducing the time it takes to get the bubble on size and also minimizing changes in layflat due to temperature conditions or film stretch. Options two & three, as described below, offer optimum systems for gusseted film.
Features:
- Simple to install and operate
- Layflat or Ultrasonic measurement options available
- Suitable for all film types and colours
- Displays instantaneous width and average width
- Automatic monitor and failsafe alarm
- Measures 0 - 2.8 meters
- Measurement resolution 0.1 mm
- Display resolution 1 mm
- Readily expandable and upgradeable
Option 1: Layflat Measurement
A single Layflat scanner houses two dynamic infra-red sensors which automatically seek and track the edges of the film irrespective of colour or thickness.
Option 2: Bubble Diameter Measurement
(Optional) 3 x ultrasonic sensors, as shown above, can be positioned around the circumference of the film, situated just above the frost line, to measure the bubble diameter.
Option 3: Combined Layflat & Ultrasonics
(Optional) Both the Layflat & the Bubble Diameter Measurement system are combined to give the finest automatic width control system on the market. (Either option computes the width correct to the nearest 0.1 mm). A control action proportional to any error is initiated via the TSM Air Correction Unit.
Construction:
The system electronics consists simply of a single board computer with power supply and operator panel. This modular design coupled with comprehensive diagnostic software ensures that the system can be easily installed and maintained by plant personnel.
The layflat width scanner is coated in a hard wearing, low friction proprietary PTFE coating, incorporating infrared edge sensors that are unaffected by film colours or ambient light. Status indicators of both width and limit sensors are included for diagnostic purposes.
|
